Waldent V-Light ECO X-Ray Machine

Description

0.4mm focus to get high-definition images:

High-voltage generator with 0.4mm focus, high-definition imaging,
enjoy top quality.
High-frequency DC technology:

Ultra-low radiation, the exposure dose is reduced by more than 30% compared
with the standard generator, maximizing effective rays and greatly reducing the
radiation intensity.
Ergonomic design:

Shoot different teeth, fine-tune the shooting time, and achieve personalized and precise control.
High-capacity lithium battery:

950 mAh ultra high capacity battery, the battery can be replaced, low cost Of use.
Multiple shooting methods:

The battery is durable, it can take about 150 images after being fully charged.

Waldent V-Light ECO X-Ray Machine

The unit is an advanced high-frequency field dental x-ray device rated at 60kV DC and 2 mA tube current. It has inverter X-ray control methods for producing tooth and maxillary bone images for both chemical film and digital sensors in high quality. The unit operates on a 22.2VDC supplied by a rechargeable LiPolymer battery pack. When radiographs are to be taken, the device can either be handheld or mounted on a tripod.
Functional Explanation:

Status Display on the LED:

LED color changing: Unit status display
Off ⇒ Turn off
Green ⇒ Standby for shot
Yellow ⇒ Exposing X-ray
Red ⇒ Unit error
X-ray EXPOSURE button:

It makes use of X-ray EXPOSURE.
If you press the button 2 seconds more, it will expose for the set time.
If you release the button before 2 seconds, it occurs a unit error.
X-ray Exposure cone:

We made the inside of the cone with lead, it prevents from exposing the X-ray
to the user.
Hand strap ring:

The top and bottom rings are connected with a hand strap.
Necklace strap ring:

It is for connecting with the necklace strap.
Big/Small size option:

Press the key to show the size option on the screen.
Power ON /OFF button:

It is a button for turning on (or turning off) the unit.
Changing exposure time up (+):

When presses the button, the exposure time will be increased.
Changing exposure time down (-):

When presses the button, the exposure time will be decreased.
User’s MODE button:

If the user wants to change the set item, press the button and you can enter
the set item area.
Saving exposure time:

If you press the button 2 seconds more, the exposure time is stored.
Charging connector:

The connector is for the purpose of charging the battery.
Hand Switch connector:

The connector is for the purpose of connecting with a hand switch.
Tooth type of exposure object:

They are buttons for selecting tooth of the exposure object.
LCD screen:

It is displayed the unit’s status and information.
Standard fixing Hall:

The hall is for the purpose of use with a tripod.
Battery replacement cover:

The cover is used for battery protection and replacement.